Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Bryant furnace don't turn off after reaching the set temp
[ 9 Answers ]
Hello, I have 10 year old bryant 80+ furnace and programmable thermostat which I replaced with new one to fix this problem. The furnace will work fine start and stop if I keep the temp at 63 degree. If I rase the temp to 65 degree it will not turn of and will keep running until you turn off te...
Furnace cuts off before reaching thermostate temp.
[ 1 Answers ]
Installed new White-Rodgers board in lennox furnace. Furnace runs but shuts down before reaching thermostat temperature.
AC gooes off before reaching desired temp,
[ 4 Answers ]
My AC units will shut off before the temp reaches the set temp. I thought is was my thermostat so I replaced it. No change. Example. Temp is reading 80. I set temp for 76. The AC goes on. The thermostat (LuxPro) has a blinking indicater when the unit is blowing. The AC stays on for a few...
Furnace not reaching target temp
[ 12 Answers ]
My furnace never reaches the target temperature on the thermostat. Even if I increase the temp on the thermostat, the temperature is never met. The current temp is set for 74 degrees, it was 62 this morning? The furnace is a Goodman, the thermostat is digital. I just replaced the thermostat...
Carier furnace shuts off before reaching temp
[ 2 Answers ]
I have a carier weathermaker furnace that shuts off before reaching temp. any idea what could be the problem. View more questions Search
|