Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Remote control on ceiling fan with a fluorescent light
[ 4 Answers ]
I purchase a Home Depot ceiling fan with a fluorescent light. I bought a remote control for the fan but it cannot control the fluorescent light. Any thoughts on how I may reconfigure the wiring to use the remote? Thanks, Dan
Fluorescent light will not light on ceiling fan
[ 1 Answers ]
I have a model #357630 Renaissance Hampton Bay ceiling fan. For a good 6 months the light would come on all by it's self. Today, I took the canopy down and found that the receiver was burned and melted a little. First I tried to wire it without a receiver, I could get the fan to work but not the...
Fluorescent light fixture
[ 4 Answers ]
I have a problem my friend has a fluorescent light fixture when he turn on the lights they stay bright for a while and then they go dim. This is what I did so far I change the Ballast light clips and the blubs but I am still having the same problem. Is there anything I might be over looking ...
Hampton Bay Ceiling Fan with Fluorescent Light Remote
[ 1 Answers ]
Can you tell me how I can get my Hampton Bay Remote to work as I inadvertently somehow programed my light and fan fixture to go on a light delay mode for 2 hours and I cannot get the darn thing to work normally. There is also a small flickering bar with an X icon that comes on the viewing panel on...
Ceiling fan light fixture
[ 1 Answers ]
Trying to replace the ceiling fan light fixture in this house... how do I get the plastic connectors off the wiring to put on new connectors - the connectors in the light kit I bought do not fit the wiring in the ceiling fan, so I need to replace the connectors, right? I'm soooooooo clueless! View more questions Search
|