Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Halogen - line voltage (120v) or low voltage (12v)
[ 5 Answers ]
Hi. I am renovating the kitchen and plan to install small halogen MR16 ceiling pot lights. Contrast and Lightolier have been recommended. At least, the Contrast line is available with either line or low voltage feeds. These questions come up as the plan calls for 9x35w MR16 (ceiling pot...
Oven temperature fluctuates both up and down
[ 5 Answers ]
Kenmore Oven Model# 790.95889300 We set it on preheat to 400 degrees, when it beeps, the inside gauge we put in indicates actual temperature is 300 degrees, so then set it at 475, and it then reads internal temp at 375-400, then we put the food in, and can't leave it set at 475, because it starts...
Temperature gauge fluctuates
[ 3 Answers ]
I have a 98 GMC truck. My problem is real simple to describe. When I start the truck up from cold, the temp gauge moves up like it should. But it goes to 210 degrees, and then comes back down to 160 degrees and stays there. What would cause this initial rise to 210 before settling on 160? ...
Difference between supply voltage and input voltage?
[ 2 Answers ]
Consider a Common Emitter amplier circuit, there'll be two inputs present in which one is applied at the base of the transistor and other at collector I want to know 1)what is difference between that two voltages ? 2)need to use both in the same circuit? ...
Well water pressure fluctuates
[ 2 Answers ]
Our well water pressure changes when we run the system at the high end such as outside hoses or more than one item at the same time. We had the well pump, pressure tank and pressure switch change about 5 years ago. I had the pressure switch changed which is set for 30 to 50,the pressure tank was at... View more questions Search
|