 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Fan on outside trane heat pump not running should it be?
We have two trane Heat pump units A larger and smaller unit The fan on the larger unit I can see running outside The fan on the smaller unit I have not seen runnning. We have tried turning it off and on and the heat up and down Should it come on and run. I believe the air out of this unit is cooler. We replaced a capacitor last year on this unit Would that be the problem again?
|
||||
|
||||
|
Yes,sure it should,, possible a capicitor,, its cheaper than replacing the motor and not needing it,, but first make sure there is power being sent to the non-working unit
Don`t just look out the window walk out and see if its making any noise/trying to run |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Trane heat pump with the air handler in the attic. We attempted to change the thermostat from a GE to a Honeywell. I have received confirmation from a specialist that we have wired everything properly. We cannot, however, get the heat pump to engage (or do anything, for that matter). We...
We have a Trane system, a bit over 10 years old. Bought home last year. Has older thermostat. Running heat now as it's winter here, but noticed that sometimes, the system begins to start, then immediately stops. After checking things, it appears this happens even when the thermostat is off. ...
I have been working on a Trane Heat Pump and the problem I'm having is the thermostat won't engage the compressor for heat, but it does on cooling mode, and in fan only mode. I jumped the thermostat at RH and G and the unit kicked on. I have replaced the thermostat and still it does the same...
I have a TRANE XR13 2TWR3024 heat pump. The schematic drawing, that came with the unit, shows a circuit board labeled DFC. There are no details on the drawing except the contacts of three relays, K1, K2 and K3. Can someone tell me how these three relays are controlled or if a complete schematic is...
I have a Trane XE 80. The furnace constantly runs without the burners on. However, I don't believe it is the fan that is running. I turn the fan off at the thermostat, however, it continues to run. The only way to shut it off is throw the breaker. Once I throw the breaker and leave it off for a...
View more questions Search
|
