Ask Experts Questions for FREE Help !
Ask
    nonnies49's Avatar
    nonnies49 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Feb 6, 2009, 12:10 PM
    Screw on the back of washing machine
    There is a special screw that holds the inlet valve on the back of the Kenmore elite front load washing machine. A phillips or regular screw drive doesn't fit and the edges are smooth and round. Help
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
    		  
    #2

    Feb 6, 2009, 04:17 PM

    Does it look like this? If so, this is a Torx screw, and drivers are available for them.
    If I had to guess, I'd say it is a T15 screw.

    Best of luck,
    WallyH
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Washing Machine makes grinding noise when washing [ 1 Answers ]

I have a Maytag Performa washing machine - about 5 years old. It makes a grinding noise when washing. Spin cycle is still quiet. Any suggestions about what to check?

Washing machine overflow but main supply/machine were off [ 10 Answers ]

Went away on Tues and came back today. Before I left I shut off the main water supply at the hot water heater. I turned on fawcett in the kitchen to see if it was off. Trickled for a second so I assumed it was off. Came back tonight and washing machine was filled to the top and I think it...

What makes a washing machine stop drainingthe dirty waterMy washing mach [ 2 Answers ]

My washing machine stopped draining. I have no warranty on it and I'd like to know if it's something I can take care of myself without the cost of a technician coming to my house

Washing Machine Drain- How high can machine lift H2O [ 1 Answers ]

Hi... Thinking about moving the washer down in the basement but the main sewer drain leaving the house is about 2' off the floor. There is currently a sewer lift installed for downstairs toilet that complicated cutting into the existing drain for new Y. Without getting to detailed, there is an...

Toilet closest to washing machine gurgles and backs up when washing machine drains. [ 2 Answers ]

When the washing machine drains, the toilet in the next room gurgles and the bowl partially fills. I have taken these steps: Ran hose down vent pipe on roof. No backup noticed. Had plumber snake from outside wall cleanout by washing machine and 1/2 bath toilet to city sewer line in alley,...

View more questions Search