Ask Experts Questions for FREE Help !
Ask
    shannon Jensen's Avatar
    shannon Jensen Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Feb 5, 2009, 10:59 AM
    Shower or tub drain removel
    I have been trying to remove my Shower drain. I got a tool that should remove it but it just keeps trune and truneing and will not come out. :eek:
    bubbly1's Avatar
    bubbly1 Posts: 8, Reputation: 1
    New Member
    		  
    #2

    Feb 5, 2009, 11:20 AM

    Try putting a screwdriver, flathead under the edge, putting pressure to push it up as it turns. You might have to put something under the screwdriver so it has leverage.
    shannon Jensen's Avatar
    shannon Jensen Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Feb 5, 2009, 11:24 AM
    Quote Originally Posted by bubbly1 View Post
    Try putting a screwdriver, flathead under the edge, putting pressure to push it up as it turns. You might have to put something under the screwdriver so it has leverage.
    I have done that no help
    bubbly1's Avatar
    bubbly1 Posts: 8, Reputation: 1
    New Member
    		  
    #4

    Feb 5, 2009, 11:46 AM

    What about needle nose pliers, pulling up while turning...
    shannon Jensen's Avatar
    shannon Jensen Posts: 4, Reputation: 1
    New Member
    		  
    #5

    Feb 5, 2009, 12:08 PM
    Quote Originally Posted by bubbly1 View Post
    what about needle nose pliers, pulling up while turning...
    I will Try that thanks for trying to help
    bubbly1's Avatar
    bubbly1 Posts: 8, Reputation: 1
    New Member
    		  
    #6

    Feb 5, 2009, 12:11 PM

    Does the drain have holes in it like a grate, I'm at the library looking in books for you
    shannon Jensen's Avatar
    shannon Jensen Posts: 4, Reputation: 1
    New Member
    		  
    #7

    Feb 5, 2009, 03:57 PM
    [QUOTE=bubbly1;1530028]does the drain have holes in it like a grate, I'm at the library looking in books for you[/QUO
    Ya I think so if I am understanding you
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Steps to convert basement toilet drain to shower drain [ 2 Answers ]

I want to convert a basement toilet drain to a shower drain. Is it a job that a do it yourselfer can do? If no- who do I hire-a plumber or a contractor? What would be a high end estimate of the cost to hire someone in New York? Also, sitting on the floor about a foot directly in front of the...

Stain removel [ 10 Answers ]

What's the best stain remover to get baby food stains from my baby's clothes that I could buy in the uk? Thanks

Rust removel [ 1 Answers ]

Need to know if there a safe way to remove rust from a galvanized gas tank (plymounth acclaim 94 model) or is it cheaper to buy new one?

Installing Basement Shower Drain with Washing Machine Drain [ 5 Answers ]

Hi folks: I would like to install a shower that drains into the same drain as my washing machine. Right now the washing machine drain, 1-1/2" ABS, comes in horizontally about 12" above the concrete floor into a 1-1/2" Tee on a vertical pipe. From this Tee, the vent goes straight up to the...

Converting cast iron floor drain to shower drain [ 3 Answers ]

I am adding a bathroom to my basement, which has partial (complete? ) plumbing already roughed into the floor (in 1976). Sewage lift station (vented) is 3 ft from 4" styrofoam plug (toilet), 4 ft from 1 1/2 inch cast male pipe end extending through floor (lav, have already added vertical vent...

View more questions Search