Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Basement Finishing
[ 4 Answers ]
Does anyone know via Ohio Building Code if the Furnace room in a finished basement needs to have the 1/2" drywall, vapor barrier, R-13 insulation and framing to meet code?? Also, does the ceiling need drywalled in this same area?? I would like to save the cost of doing this in what is going...
Finishing basement
[ 2 Answers ]
I just wanted some advice and opinions on basement insulation. I finished part of the basement a couple of years ago, and want to finish the rest. The original part I finished with 2x4 studs, 16 inch centers, and R-12 pink fiber insulation. I'm going to do the rest with 2x4 24 inch centers this...
Finishing Basement
[ 2 Answers ]
There are multiple questions that I would like answers to about finishing my basement. First question is drop ceiling. I am OK with installation and understanding the grid pattern. I want know what recessed lights can be used, how many are needed per sq. footage and bracing requirements for...
Basement bathroom finishing
[ 1 Answers ]
Hi all, I have a couple questions I hoping someone can help me with. I'm finishing a bathroom in my basement and had it rough during construction (planned ahead) so its not so much work, but I am wondering about venting the drains- it has only one vent hooked now at the drain where the sink will...
Finishing basement bathroom
[ 17 Answers ]
When we built our house three years ago, we had the basement roughed in for a bathroom. I had talked to the plumber at that time about what would need to be done in the future, but alas have forgotten completely... :) Attached is a picture of the rough in prior to pouring the basement floor. ... View more questions Search
|