Ask Experts Questions for FREE Help !
Ask
    dcptualatin's Avatar
    dcptualatin Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 2, 2009, 06:56 PM
    Branced hot water system
    The Watts(r) recirculating system I'm about to install required an additional valve (or valves) if I have a branched hot water system. How can tell if I have a branched system? The whole system is enclosed within the walls.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Feb 3, 2009, 07:22 AM
    All water systems have a main that feeds pressure to each branch. All systems have this. A 1/2" branch can furnish water to no more then three fixtures. One branch feeds the bathroom, one branch feeds the kitchen, etc. And so on. Follow the directions that Watts gives you. Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why do I hear water running in my pipes, in a hot water heating system? [ 2 Answers ]

I have a hot water heating system and just recently , I am hearing water running in the pipes all the time.What could be causing this? Please help.

Hot water only - no cold water - soft water system [ 4 Answers ]

I have what seems like a very odd problem. I have lost water pressure to all sinks, one shower (other works fine), and the backyard hose (frontyard hose works fine). I'm very confused, but initially had a problem where some tiny gold pellets of some sort had backed up into places where we were...

Water Hammer on Hot water loop of Steam Boiler System [ 3 Answers ]

We have a steam boiler that provides steam for most of the house but also has a hot water loop for the additions. We have been getting a lot of water hammer and it sounds as if it is coming from the area where the first hot water radiator starts (ie it is from the hot water loop). Does anyone...

Low water pressure oil hot water heating system [ 1 Answers ]

How does one go about increasing water pressure in a baseboard heating system?

How do I increase H2O pressure on well system with a water filtration system? [ 2 Answers ]

Howdy, I would like to know how I can increase my water pressure. My current system uses a well pump with a small pressure tank, and "D" control valve. It then runs through a WATERSOFT filtration tank, RAINSOFT water softner, and on the Hot water side, an AQUASTAR on demand hot water system. I...

View more questions Search