Ask Experts Questions for FREE Help !
Ask
    jameswest's Avatar
    jameswest Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 31, 2009, 09:02 PM
    Blower Motor Replacement
    How do I replace a blower motor in a residential gas furnce?
    greghvacguy's Avatar
    greghvacguy Posts: 45, Reputation: 2
    Junior Member
    		  
    #2

    Jan 31, 2009, 09:10 PM

    Pull the blower housing out. Take blower wheel nut off,take the three or four bolts off motor bracket,then take the bolt off the band then put new motor in
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

5hp briggs and stratton tiller motor need model # or replacement motor [ 3 Answers ]

I have an earthquake tiller model 5020 with a 5hp briggs and stratton motor that I need to replace but I can not find the model of the motor. Does anyone know which motor replaces that motor or do you know the model number of the motor that was used on that tiller?

Where to find Janitrol GUH 100 replacement blower motor [ 2 Answers ]

Hello, it appears that the blower motor on our Janitrol GUH 100 has called it quits. The motor says it is a 1/6 HP GE motor. Is there a place where I can get a replacement motor for cheap or at least a good price? I am renting and it would take my landlord at least 3 weeks to get someone up here...

Replacement Furnace Blower Motor [ 4 Answers ]

Hi, I have an older (~40 years, the original with the house) Coleman furnace. The blower motor (General Electric, 1/6 hp, 110 V, 60 Hz, 3.6 amps, PH 1, 1725 rpm) burnt out the other morning. I went to the local shop (RONA) to find a replacement and they didn't have the exact motor. Instead,...

Replacement blower motor wiring [ 1 Answers ]

I purchased a replacemet fan motor for an older rheem heat pump. The wiring is different from the original. There are 2 browns for the capacitor, one green to ground, a black common, and a yellow one labeled "line". Where does the yellow wire connect? The old one had 2 for capacitor and one common.

Furnace Blower Motor replacement [ 3 Answers ]

I have a Comfortmaker furnace with General 90 controller. My blower motor stopped working and when I try to turn it on it gets hot, smells like something burning and no air. Capicator was tested and it is OK. Motor is driving excessive current and just heats up. HVAC technician quoted $700 to...

View more questions Search