Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ohm meter reading to test thermocouple for carrier model 394jaw048080 ?
[ 12 Answers ]
Great site! I have a Carrier Model # 394JAW048080 The blower does not come on and after the pilot is lit (electronically) the main gas does not come on. I previously had a tech come out and diagnose the thermocouple for temp overlimit a few years ago and I replaced the unit for $15 in 5...
Coleman furnace tried replacing the thermocouple and nothing
[ 9 Answers ]
I am new to the site and have found it very interesting. I have a 21 year old Coleman furnace model #7956-856 and I replaced the thermocouple and I still hear a click sound approx. 5 seconds after the heat is turned up above room temp. At the time of the click, the pilot light goes out and nothing...
Replaced thermocouple furnace still won't stay lite
[ 2 Answers ]
Our furnace was pushing out cold air, my husband replaced the thermocouple and now the furnace will lite, then about 20 seconds later the light will go out and the whole furnace will stop working. It is a Coleman forced heat. Please give us some help
Thermocouple on Old Carrier Gas furnace
[ 5 Answers ]
If the thermocouple is defective, could you light the pilot and it and the burner would stay lit? How do you know it is defective? Would the defect be visible? If so, could you tell me What it would look like? The heater is 20+ years old. I have never had ONE problem with it, until I had it... View more questions Search
|