Ask Experts Questions for FREE Help !
Ask
    tonybug's Avatar
    tonybug Posts: 7, Reputation: 1
    New Member
    		  
    #1

    Aug 10, 2006, 05:26 PM
    Valve adjustment
    16.5 overhead valve I/c briggs motor on riding mower what is the proper valve adj.
    thebriggsdude's Avatar
    thebriggsdude Posts: 1,096, Reputation: 53
    Ultra Member
    		  
    #2

    Aug 11, 2006, 12:44 PM
    http://faqs.custhelp.com/cgi-bin/faq...ted=1101860144
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tiolet tank adjustment [ 1 Answers ]

Hi, I have a slow leak from the tiolet water basin into the bowl. I know that the water level line on the basin inlet is being exceeded to the point where the water in overflowing into the inlet tube. I don't know how to manipulate the float so that the basin doesn't fill up so high. It's a kohler...

Valve adjustment 16.5 I/c o/v [ 3 Answers ]

Model 310707 code 020518ze type 0137-e1 what is the valve adjustments on this engine

Color adjustment phiilips big screen [ 1 Answers ]

Hi, I have an hdtv phillips monitor 60 inches. A so called tech had replaced or fixed the board , we didin't had picture at all, now we do after the installacion but the color are all messed up I've play a little bit with the conversion of red blues etc by putting togheter the 2 crosses But I...

Shower diverter adjustment [ 1 Answers ]

Let me start by saying I an a renter suffering from half-assed maintenance. They recently installed a shower diverter, but it requires an awful lot of water pressure in order to stay "open". As a result we are running out of hot water without being able to get through 2 short showers in the...

Gas valve noise on main valve engagement [ 1 Answers ]

I have a carrier 58gs100ga furnace with a white rodgers 36e93 gas valve. The main gas valve solenoid chatters or rattles for a split second before it stays engaged after the pilot is proved. I just replace the spark/lock out board and the fan board for a different problem. This chatter is...

View more questions Search