Ask Experts Questions for FREE Help !
Ask
    Wellswood's Avatar
    Wellswood Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 27, 2009, 09:58 AM
    White Screen and Message after booting into Windows XP
    The following message is displayed in black letters on a white background.

    The device in the system modular bay cannot be identified. It may not be completely inserted or may have some other problem. Please read and complete the following steps in order:

    1. press the device completely and firmly into the bay.
    2. press the esc key wait for the system to power down.
    3. press pwr button try redetecting the device.

    The device in question is most probably the PCMIA card wireless LAN adaptor as the computer boots into Windows XP without the error message if I hold the card firmly in place.

    Would it be a good ideas to clean the socket using compressed air to blow out any dust followed by isopropyl alcohol? Any suggestions would be most welcome.

    Thanks in advance.
    seahwk83's Avatar
    seahwk83 Posts: 3,276, Reputation: 212
    Ultra Member
    		  
    #2

    Jan 27, 2009, 11:22 AM

    Would not use alcohol but blowing it out may help

    Try starting the laptop without the card in and then insert it when windows is booted up to see if that may help
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pc not booting past Splash Screen [ 7 Answers ]

Hi, My PC isn't booting into the windows XP Splash screen. It reaches just about that stage and reboots. I updated the BIOS. Switched the RAM. Used other (known working) drives. Took out the sound card and all the others cards. Still nothing Regards

Pc not booting past Splash Screen [ 1 Answers ]

After install of Symantec Corporate Edition Antivirus 10.2, PCs hang after Splash Screen. If Antivirus is not installed, it is fine. How do I fix this?

Having problems booting windows? [ 9 Answers ]

When I start my computer it boots like normal , but then the screen turn the screen all black and lopps to the starts up page that says... bios and so on.. I'm running windows 64 bit . It was working finr.. but now I can't even log on to the computer

Black screen after windows splash screen windows xp [ 2 Answers ]

Black screen after windows splash screen windows xp

Windows XP not booting up properly [ 16 Answers ]

I'm currently posting from my own laptop, but my family's main computer isn't doing so well. Everything was working fine last night, no problems with shut down or anything else for that matter, but this morning when my dad turned on the computer, Windows refused to finish loading. We are running XP...

View more questions Search