Ask Experts Questions for FREE Help !
Ask
    jkstar's Avatar
    jkstar Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Jan 24, 2009, 03:25 PM
    Glacier Bay Bath install
    I'm having trouble installing the Glacier Bay faucet. Any help?
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #2

    Jan 24, 2009, 03:27 PM

    What is your problem, and what is the model number of your faucet?

    John
    jkstar's Avatar
    jkstar Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Jan 24, 2009, 03:31 PM

    It's a tub/shower faucet 814 278G, No water comes out the spout.
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #4

    Jan 24, 2009, 03:36 PM

    Is the faucet installed and no water at all or some water?

    John
    jkstar's Avatar
    jkstar Posts: 5, Reputation: 1
    New Member
    		  
    #5

    Jan 24, 2009, 03:38 PM
    The faucet is installed, water is turned on, but no water comes out of the spout.
    jkstar's Avatar
    jkstar Posts: 5, Reputation: 1
    New Member
    		  
    #6

    Jan 24, 2009, 03:40 PM
    Sorry, there is a dribble of water. Check valves are open.
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #7

    Jan 24, 2009, 03:40 PM

    Is it single handle or two handle the model Number you posted I couldn't find it, have you opend the angle valves under sink?

    Thanks.
    John
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #8

    Jan 24, 2009, 03:42 PM

    Ok remove the Areator turn on the faucet and see if the water flows good clean the Aerator and install, see the Image, Thanks.

    John
    Attached Images
     
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #9

    Jan 24, 2009, 03:44 PM

    Sorry I gave you wrong info I thought it was the sink faucet,
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #10

    Jan 24, 2009, 03:45 PM
    Give me 1/2 an hour I will get back to you, Thanks.

    John
    jkstar's Avatar
    jkstar Posts: 5, Reputation: 1
    New Member
    		  
    #11

    Jan 24, 2009, 03:53 PM
    Thanks, Afaroo
    We have Water! Not sure what we did but it works now.

    Thanks for your help.
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #12

    Jan 24, 2009, 04:10 PM

    Very good may be you had air in the system and it is clear now, let us know if you will have any other issues, good luck.

    John
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Glacier Bay [ 16 Answers ]

What is the toll free phone number for glacier bay faucets?

Basement 1/2 bath install [ 9 Answers ]

I would like to add a half bath in my basement. The planned half bath is just below my kitchen sink on the main level and near the first floor laundry as well. My laundry is just off the kitchen but there is crawl space under it. In the area where I want to put the half bath, there is a 2" PVC...

Basement Bath P-Trap Install Details [ 1 Answers ]

I am preparing to install a bath tub in a new basement bath. The groundwork is done, dirt's back in the hole and my next step is to re-pour the concrete. I know I need to leave a box around the tub drain and vent connections for hook-up later and have a few questions on the details. 1. How...

Glacier Bay Faucets [ 1 Answers ]

I work at an apartment property that is just about a year old we have Glacier Bay faucets we are having trouble finding the diverter for the kitchen faucet they are whistling and making a thumping noise and when the sprayer is used they often leak we have looked at our vendors like HDS and they do...

View more questions Search