Ask Experts Questions for FREE Help !
Ask
    vtlkmonster's Avatar
    vtlkmonster Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 24, 2009, 05:20 AM
    Furnace stops working and needs to be bled
    Hello,

    I have a modular home with a Miller furnace, Becket motor, up until 2 days ago I have not had any problems with it. Then I woke up cold. The light on the module was flashing, I pressed reset and nothing, I bled the line (took about 2-3 seconds) Kero started flowing so I closed it and the furnace fired and worked. Everything was good, worked for 48 hours and then it happened again. I have a top feed tank that is new and I have almost a fuel tank of Kero in it. Any help is appreciated.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Jan 24, 2009, 11:16 AM
    Check out the lines from tank to furnace, sounds like maybe a leak somewhere and air is getting into the lines
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Prism 3d engine stops working. [ 2 Answers ]

Can anyone help me out with the prism 3d engine.everytime I try to play one the 18 wheels of steel truck games the prism 3d engine stops working and valusoft was no help at all with this problem.

How long till the pill stops working? [ 2 Answers ]

If a girl uses the pill and then suddenly stops, how long till she can get pregnant? Or should I ask, how long till the pill has been worked out of her system? Thanks.

Overhead Microwave Stops working when it is cold outside [ 1 Answers ]

My GE overhead Mirowave Oven stops working evry time the temperature outside goes down below approximately 25F. I tried turned it off and on and soes come back to life but will di as soon as we try to warm something. When th temp outsid goes up it comes back to lif.

Well Pump stops working [ 4 Answers ]

Anything to do with plumbing is my worst area to deal with. Twice in the past week our Goulds above ground jet pump suddenly stops it's on and off cycling while running the water and the water quickly ran to a trickle and stopped. After about 2 minutes it suddenly started again, but with spurts of...

View more questions Search