Ask Experts Questions for FREE Help !
Ask
    benbleu's Avatar
    benbleu Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 23, 2009, 01:46 PM
    Installed honeywell L8148E Relay - Copper Coils Burnt.
    Just had a L8148 installed-
    Plumber left and 10 minutes later I noticed scent-
    Took the face plate off- noticed the coils all fried-
    He is returning this evening-
    Just curious as to likely issues.
    Thank you.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 23, 2009, 03:54 PM
    Obviousely the part is installed incorrectly and that is the issue.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installed a honeywell RTH7600B and the cooling and heating are reversing? [ 4 Answers ]

My new RTH7600B when set to heat is cooling. Checked the wiring and settings to no end. What can I do?

Installed new honeywell rth 7500 thermostat [ 3 Answers ]

I recently installed a honeywell rth7500 thermostat and am not sure if it is correct. The old thermostat is a GE, not sure how old. I have a heatpump system (Goodman A61-20) I wired it as follows: Old R(red)- new R Old O(orange) - new O/B Old G(green) - new G Old Y(yellow) - new Y Old...

Installed Honeywell RTH3100C and A/C kicks on after a few minutes of heat [ 8 Answers ]

I have a single stage heat pump. Electric. I'm not sure what I have done wrong. I have the following wires: Yellow White Red Green According to the installation manual, I have installed them in the following locations:

Need to re-wire a burnt relay with diagram [ 7 Answers ]

We just bought this house and the fan runs continuously, I got a new limit switch as the old one had a broken auto/man switch, and the relay was burnt out. The old relay was 5 wires the new one is 6 but there is no diagram on the old one. Wiring is the worse thing for me to do, anything else is...

Installed Honeywell RTH7400 Thermostat but get no power [ 2 Answers ]

I have tried to comb through the threads to find a problem that fits mine, but I didn't find it. So please forgive me if this is a repeat question for something that has already been presented. I have just installed 2 Honeywell programmable thermostats (RTH7000 series). The one for my...

View more questions Search