Ask Experts Questions for FREE Help !
Ask
    thermostat1's Avatar
    thermostat1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 23, 2009, 03:02 AM
    Installing thermostat
    I'm installing a honeywell rth110b thermostat and I can't tell how to hook up the wires. Do they go in from the bottom, top or where? The picture/instructions are not clear. Also is there a switch to flip for the jumper thing?
    Thanks
    ROLCAM's Avatar
    ROLCAM Posts: 1,420, Reputation: 23
    Ultra Member
    		  
    #2

    Jan 23, 2009, 04:35 AM

    Get a technician to do it.
    The termostat in the hot water system is
    Not functioning properly.
    The same thing happened to us.
    A technician can change the termostat
    In less than 15 minutes.
    The part and labour is not exhorbitant.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installing a thermostat [ 1 Answers ]

I am trying to install a new Honeywell model number rth221b. I have 4 wires coming out of my wall. One white, one red, one blue, and one green. How do I wire this thing. I tried by what a friend told me but my heater won't come on.

Installing new thermostat [ 3 Answers ]

I am attempting to replace old Honeywell w/new Hunter (44360). The existing thermostat has six wires (White, Green, Blue, Black, Red & Yellow), but the new thermostat doesn't accept all these wires. The Hunter instruction state that the heat pump MUST be single stage; is that part of my problem? ...

Installing new AC thermostat [ 1 Answers ]

We are trying to replace 2 Maple/Chase 6 wire thermostats, one upstairs and one downstairs (one AC unit). We can see where the first four wires go, but there are two wires off to the side (red and black) in the old unit and we can't match them to connections on the new unit. (Honeywell...

Installing a thermostat [ 1 Answers ]

When you put a new thermostat in is it easy to install do you just put the green wire were the g is and the red wire were the r is and so on?

Installing a new thermostat [ 3 Answers ]

My old thermostat is a Carrier and says "Heat Pump System Control" it does not have a model # and is probably 20 years old. I have a new thermostat which is a LUX TX9000. I removed the old thermostat and there are eight wires all of which are connected They are as follows: w2 - Brown ...

View more questions Search