Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Installing a heat duct in existing basement wall
[ 3 Answers ]
I need tips to install a 6x10 heat duct in a wall. I have installed a wood burner and want to vent one of the heat runs into a large family room. The family room side is finished, the back of the wall is in my mechanical room and unfinished.
Replace 5 ton with a 4 ton AC; keep existing duct work
[ 3 Answers ]
I have to install a new air conditioning unit. The old one is dead (Heil 60LC-000087CR; a 5 ton machine manufactured in 1991) Two contractors have bid to replace it (Trane 13 SEER and a Lennox 14 SEER). Both have recommended 5 ton machines. However on this site and other literature - proper...
Loud Return Air Duct
[ 1 Answers ]
I have a forced hot air furnace, installed in September 2002, located in the basement. The blower motor is belt driven, single speed. While the blower is running it you can hear it all over the house. The return air grill is located out side of a bedroom and during the night when the blower comes...
Return Air Duct
[ 3 Answers ]
I rent a townhome. It has 2 air conditioning units. I don't know what brand they are. The upstairs does not cool very well. It is always warmer than downstairs. The return air unit is in the storage closed downstairs. There are 2 return air ducts. The one downstairs was covered up behind...
Wiring duct fans to my existing furnace
[ 2 Answers ]
Hello all. This is my first post on these here forums :) I have been searching on the internet for weeks without success. I have a Goodman B18099-13 Control Board on my furnace. I've installed multiple duct fans in my duct work in order to increase the airflow through my wall/floor... View more questions Search
|