Ask Experts Questions for FREE Help !
Ask
    HC27's Avatar
    HC27 Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Jan 20, 2009, 08:41 PM
    Honeywell electronic air cleaner
    I have a Honeywell electronic air cleaner attached to a Bryant plus 80t furnace. I can not find a model number on the air cleaner and need replacement filters. There are two "chambers" that pull out and two metal mesh type filters that go on top. I can not find these filters anywhere. Can you point me in the right direction? Thanks.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 20, 2009, 08:43 PM
    The metal mesh filters are washable as well as the electronic cells.
    HC27's Avatar
    HC27 Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Jan 20, 2009, 08:46 PM

    I understand they are washable. I have washed them, but the filters are torn out from the frames.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Jan 20, 2009, 09:40 PM
    Stop by any HVAC company. They will be glad to order them for you.
    HC27's Avatar
    HC27 Posts: 5, Reputation: 1
    New Member
    		  
    #5

    Jan 21, 2009, 07:28 AM

    Thank you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing a Honeywell T8575D2003 with a Honeywell RTH8500. Having trouble with wires [ 1 Answers ]

I'm replacing a Honeywell T8575D2003 with a Honeywell RTH8500. Didn't think there would be issues, manuals are all straight forward. However when I removed the T8575, the wiring set up did not match what the RTH8500 was expecting. The T8575 has 8 wires connected as follows < 1 ...

Install Honeywell RTH230B, Removing Honeywell Q674L [ 2 Answers ]

I am removing a old (1987) Honeywell Mercury THermostat Q472L Base that has W, R, Y, G, B, O. The RTH230B has Rc (which I assume to be B), Rh (which I assume to be R), Y (to Y), W(to W), G (to G). I have no idea what to do with the O (which I read could be the Changeover. Do I just tape it up...

Installing Honeywell RTH6300B from an older 7 wire Honeywell. PROBLEMS [ 4 Answers ]

Hello everyone, I am new here. I found this site which trying to troubleshoot my problem. Any assistance would be GREATLY appreciated. Basically I have an older honeywell programmable thermostat with 7 wires attached. They are as follows... C - Black wire L - Blue wire R- Red wire W2 - brown...

Replacing Honeywell T8411R with Honeywell RTH7500 - wiring problems [ 1 Answers ]

I need help getting my new, programmable thermostat to work. I currently have a dual-stage Heat Pump and A/C unit that works fine. The current thermostat is the Honeywell T8411R. I don't know the number for the subbase, but it's the one that came with the thermostat. The current (operational)...

Honeywell Electronic Theromstat malfunction? [ 1 Answers ]

My furnace shuts down randomly and does keep house at selected temperature. When I push to raise the temp there is no response from furnace after it has shut itself down. The thermostat is a cheaper model from Target installed last summer. The furnace is 4 years old. The first repair man...

View more questions Search