Ask Experts Questions for FREE Help !
Ask
    nobowls's Avatar
    nobowls Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 20, 2009, 04:45 PM
    How do I adjust bottom partials with two springs? And thank you for this site nobowl
    My bottom patrial plate doesn't fit properly. The two springs aren't adjusted right
    nobowls's Avatar
    nobowls Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Jan 20, 2009, 04:52 PM
    Can you tell me how to adjust my bottom partial to avoid cheek biting
    nobowls's Avatar
    nobowls Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jan 20, 2009, 04:56 PM

    I don't understand what you want for a question.will try you later
    Thank you
    nobowls
    flossie's Avatar
    flossie Posts: 1,903, Reputation: 181
    Ultra Member
    		  
    #4

    Jan 20, 2009, 06:50 PM

    Ideally you should see a denturist or dentist to have your partials adjusted. You could break the clasps off if you do it yourself and then your denture won't fit at all.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Considering lowering springs [ 5 Answers ]

Would it be a bad idea to put lowering springs (pro-kit) on my Mazda3 sedan considering I drive around 420 miles a week? It would be for appearance purposes only. Should I be concerned about the accelerated wear and tear on other parts especially with the miles I will be putting on it.

Compression springs and extension springs [ 2 Answers ]

I am an artist trying to figure out which extension spring to buy to hold back three compression springs. I am using 3 compression springs with the following attributes: deflection a load = 1.1" load lbs =1.95 and rate lbs/in = 1.77 (these are the specs in the catalog) they are stacked in a...

View more questions Search