Ask Experts Questions for FREE Help !
Ask
    celiberti's Avatar
    celiberti Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jan 19, 2009, 11:55 AM
    Hona civ IAC valve
    Please show me where the IAC valve is located at the engine of 1996 Honda civic
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Jan 19, 2009, 11:58 AM

    It's located on the back of the throttle body--you can't miss it. This link may help:

    https://www.askmehelpdesk.com/cars-t...ml#post1054149
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1 valve shut off hot water tank valve [ 9 Answers ]

I was just trying to get some Pro's thoughts on, why there would be a shut off valve on the hot line going out of my hot water tank, and no valve on the cold coming in? Is there a reason for this? Is it OK to add a valve on the cold,so I can isolate the tank, by shuting both valves , and would...

No Shut Off Valve between water heater and bathroom sink valve [ 14 Answers ]

I have a constant drip in my bathroom sink. After a little trouble shooting, I came to the conclusion that my hot water valve underneath the sink is the culprit. I traced the pipe down the wall, into the basement and to the water heater. The only thing between the water heater and the old valve in...

Stuck middle valve - 3 handle shower valve [ 3 Answers ]

Help and suggestions!! The middle handle, used to divert water from the tub spout to shower head is stuck in the 'tub' position. I have removed the handle and trim bezel and tried to turn the shaft with pliers - no luck & quit before marring the splines on the brass shaft. What now??

95 Hona Accord [ 2 Answers ]

Can anyone please help me?. my turn signals aren't working but my hazard lights do an all the rest of my factory lights what can this be?. an I checked the fuses and there all good

Gas valve noise on main valve engagement [ 1 Answers ]

I have a carrier 58gs100ga furnace with a white rodgers 36e93 gas valve. The main gas valve solenoid chatters or rattles for a split second before it stays engaged after the pilot is proved. I just replace the spark/lock out board and the fan board for a different problem. This chatter is...

View more questions Search