Ask Experts Questions for FREE Help !
Ask
    aem627's Avatar
    aem627 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 17, 2009, 04:03 AM
    Furnace not clicking on correctly
    The set temperature is 68, but the thermostat is reading 58. The furnace appears to be working - it clicks on and heat comes out of the vents, but it only runs for a few minutes and then shuts off. Could this be an issue with the thermostat? Our house is only 6-7 years old, so I'm assuming that's how old the furnace is - we've only been here for 2 years. Any thoughts would be greatly appreciated. Nothing like having your heat stop working on the coldest night of the year!

    Thanks,
    Amy
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 17, 2009, 05:06 AM
    Have you changed the air filter lately?

    Turn the thermostat up more and see if it keeps running.

    Does the blower keep running or does the complete furnace shut down ?

    Exact brand and Exact model of unit.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace Operates Correctly in All Ways Except. [ 12 Answers ]

... the heat output is low. Centurion Furnace, 75,000 btu., with AC Thermostat works correctly, starts/stops correctly. Furnace starts correctly, blue flame shooting ~5-6 inches into the heat exchanger Wind blows from all vents as expected, and the same as when working. Air temp is very...

Older Day & Night Furnace NOT Cycling Correctly? [ 20 Answers ]

:( I have a Day & Night Furnace MODEL # 397HAW036060 (1982), the Problem(s) are as Follows: 1) The Blower is coming on BEFORE the Burner starts to Cycle, and runs for about 10-12 minutes on Hi-Speed, blows a lot of cold air into the House...Isn't the Burner supposed to Start 1st?? How to Correct??...

Tempstar furnace doesn't seem to be working correctly [ 3 Answers ]

I am completely ignorant about this subject, but here goes. The rental house we recently moved into is supposed to have a high efficiency central heat and air unit newly installed. The model # is FSM2x3000A, and is, I believe, a Tempstar. The vents blow cold air more often than warm and the...

Gas furnace is clicking [ 27 Answers ]

Hello, I have a gas furnace that has an electronic ignition? The blower and the fire come on but something keeps clicking and I don't get heat. This has been happening since I turned the gas back on. Does anyone have any ideas? Any help Would be appreciated, I am a single mom and money is...

Furnace not working correctly [ 1 Answers ]

My furnace kicks on and off like everything is okay but it blows cold air. I took the cover off and it has an automatic pilot but it is not coming on. Any suggestions?

View more questions Search