Ask Experts Questions for FREE Help !
Ask
    coolkay55's Avatar
    coolkay55 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 15, 2009, 05:40 PM
    Rheem Gas Furnace light's not on
    I have a Rheem Criterion II, it's not working did everything it said and it well not come on, I saw that the little lights are not on! Is there a reset for this or am I in trouble
    :confused:kaycool55
    gordo1246's Avatar
    gordo1246 Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Jan 15, 2009, 05:45 PM

    Hi
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #3

    Jan 15, 2009, 05:53 PM

    Check breaker. Check fuse at shut off swith located on or near outside of furnace. If these are okay, then look at your control board, there is a small fuse on the board, check it. The fuse may also be in one of the wires leading to the transformer. Most likely one of these things is your problem. If not, then you may have a bad board. Let me know what you find, and if you need more help locating these fuses, let me know.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rheem gas furnace [ 5 Answers ]

I have an older Rheem gas furnace with badly burnt wiring and needing to rewire. I need a wiring diagram

Rheem oil furnace [ 1 Answers ]

My Rheem oil furnace will not start, Ignite, I had the tank filled, replaced the filter. And then bled the line. I have pushed the reset button several times, the pump will run for several seconds then quit. Anyone have any Ideas?? Kind regards guide

Rheem furnace wiring [ 2 Answers ]

Have a 8 year old Rheem furnace , should the wiring to the thermostat mimick the wiring to the furnace controls? The a/c works but when I turn on the heat the inducer motor turns on (recently replaced , but it does not cycle or ignite.

Light's passage into the eyes [ 2 Answers ]

This is quite a difficult question to explain without images but here goes... I understand that when you focus on an object in the foreground any objects in the background are doubled, so if you look at your finger close up you see two chairs in the background where there is only one, and I know...

Rheem 90 plus furnace [ 1 Answers ]

Installed in 2004. Just before the fan comes on the furnace bangs/clunks - sound like someone hitting pipes with a wrench. We have had trouble with ignition. Could this be related? If not, any answers?

View more questions Search