Ask Experts Questions for FREE Help !
Ask
    Newman007's Avatar
    Newman007 Posts: 8, Reputation: 1
    New Member
    		  
    #1

    Jan 14, 2009, 12:47 PM
    Ran engine without blade
    Yep. I took the blade off my 5 yr old Craftmans mower with Honda engine to sharpen. Long story short, I went to start it up several weeks later it was hard to start then surged quite a bit. I shut it down and tried to start it again. Cord was tough to pull once then couldn't pull at all after that. Frusterated I put it away. That's when I noticed the blade sitting on the bench.

    What damage did I cause?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Jan 14, 2009, 02:07 PM

    Should not be related.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Design Of Grill Blade Thickness ( Gravity Louvered Grill Blade) [ 3 Answers ]

Kindly Design An Gravity Louvered Grill, It is Required For Staircase Pressuriation System Design Thickness Of Blade Such That It Should Lift When Pressure Exceeds 50 Pa,& Close When Pressure Drops 50 pa It Is a 20 Storey Building ( 20 Staircase) System Pressure 50 Pa

My 16 hp vanguard engine made a terrible racket inside the engine no longer runs, why [ 2 Answers ]

Mower was running fine, started making a noise inside engine, lost power, noise returned, and engine died. No longer will start, just spins. Is the engine trashed or possibly fixable?

Impossible of change v6 engine to EX engine in honda 1997 model [ 1 Answers ]

Is it possible to change v6 engine in honda 1997 model Ex engine (V-TEC) and what are the possible components that will change

Is a1998 ford escort 2.0l 4 cyl. Engine a interference engine or not? [ 3 Answers ]

I broke my timing belt last week. I have a '98 Escort w/a 2.0L 4 cyl. Engine. The shop where it got towed to says that it's an interference engine. First off, I called my nephew in NH who has been a mechanic for the past 18 years & he said it's not an interference model. I then checked out The...

View more questions Search