Ask Experts Questions for FREE Help !
Ask
    bigbob9696's Avatar
    bigbob9696 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 12, 2009, 03:27 PM
    No heat for Gas Dryer
    General Electric Gas Dryer, Model DDG180RALWH, Serial #TG308305G. Dry tumbles but no heat at any of the settings. Suspect selinoid is shot but this is my first repair attempt. Any ideas, anyone? Thanks. Bob.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jan 12, 2009, 05:49 PM
    It might be the ignitor down at the burner.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My dryer only works on low heat and not on high heat. [ 1 Answers ]

I have Whirlpool dryer model #TEDX640EQ1. The dryer does not produce any heat when on the high heat setting, but will get warm on the low heat setting. I need the high heat setting to work so that it doesn't take 2 cycles or more to properly dry my clothes. Anyone know what the problem could...

Dryer runs but no heat gas dryer [ 2 Answers ]

Sears gas dryer Model No 110.72602101 runs but will not heat. Igniter okay, gas inlet coils okay.

Dryer does not heat [ 3 Answers ]

On move in, the existing clothes dryer outlet did not have matching prongs to my dryer. I replaced outlet with prongs to match dryer. This is an electric dryer White to silver connection, bare to green ground, other 2 wires to the two gold connections. Dryer runs but does not heat. ...

Amana Gas Dryer won't heat on heat cycle [ 2 Answers ]

I have an Amana gas dryer about 10 years old. The dryer will heat and the timer will advance on the timer cycle but it will not heat on the heat/more heat cycle. I have cleaned the lint vent entirely. I can see the ignitor get red hot and then ignites the gas on the timed setting. I am not sure...

View more questions Search