 |
|
|
 |
New Member
|
|
Jan 10, 2009, 11:52 AM
|
|
Spout removal: access to set screw blocked?
My shower diverter isn't working and I'm trying to remove my spout assembly. I'm guessing it's the set-screw type, but the openning (identified in attached picture) has a hard plastic plug in it. Am I supposed to drill that out or something?
Thanks in advance!
|
|
 |
Eternal Plumber
|
|
Jan 10, 2009, 12:00 PM
|
|
That's what I'd do. Drill it out and pull the spout. Good luck. Tom
|
|
 |
New Member
|
|
Jan 10, 2009, 12:08 PM
|
|
 Originally Posted by speedball1
That's what I'd do. Drill it out and pull the spout. good luck. tom
I forgot to mention that this is a manufactured home. Another web site ( Replacing a Manufactured Home Bathtub by Mark Bower - Manufactured Housing News) seems to indicate I'd need to go through the wall from the back side. I can do that if I have to (means drywall repair). Do you still think I should try drilling out the plastic first?
|
|
 |
Eternal Plumber
|
|
Jan 10, 2009, 12:14 PM
|
|
Do you still think I should try drilling out the plastic first?
Tear up your walls when there's a change that you can remove the spout by drilling it out? Sure I guess you could do that but I like to try the easy stuff first. Good luck, Tom
|
|
 |
Plumbing Expert
|
|
Jan 10, 2009, 12:24 PM
|
|
In the pic you posted, the spout is not separately removeble. The whole fuacet(spout and all) is one piece. Very common in munufactured homes. You would have to replace the whole fuacet to fix your problem. This means you will have to access the fuacet from behind tub.
Just a suggestion. If you do this, I would recommend making an access panel behind tub, instead of repairing drywall. This way you will be able to access the faucet for future repair/replacement. Good luck and please let me know what you think.
|
|
 |
New Member
|
|
Jan 10, 2009, 12:35 PM
|
|
 Originally Posted by speedball1
Tear up your walls when there's a change that you can remove the spout by drilling it out? Sure I guess you could do that but I like to try the easy stuff first. Good luck, Tom
I just didn't want to damage the fixture, which appears to be exactly what happened. The plastic was about 1/8" thick and there's now a hole right into the spout pipe. I guess I may have to replace the whole fixture now, and open up the wall too... :(
|
|
 |
New Member
|
|
Jan 10, 2009, 12:40 PM
|
|
 Originally Posted by mygirlsdad77
...you will have to access the fuacet from behind tub.
Thanks MGD77, that's what I was kind of guessing. Good idea on the access panel, that's easier anyway.
I appreciate all the fast responses!
|
|
 |
Eternal Plumber
|
|
Jan 11, 2009, 02:47 PM
|
|
The plastic was about 1/8" thick and there's now a hole right into the spout pipe. I guess I may have to replace the whole fixture now, and open up the wall too...
Oops! My bad! Simply fill the hole with epoxy and you'll be back to square one. Sorry, Tom
|
|
 |
New Member
|
|
Jan 11, 2009, 05:22 PM
|
|
 Originally Posted by speedball1
Oops! My bad! Simply fill the hole with epoxy and you'll be back to square one. Sorry, Tom
Tom- No problem at all, I had to replace the full assembly anyway to fix the diverter. Dang manufactured homes, always have to be different. Thanks for the quick responses!
-Travis :)
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Slip-on Tub Spout - Can't access set screw
[ 19 Answers ]
I have been reading the posts about removing the different types of spouts. Mine is a 1/2 inch copper tube out of the wall. I can't get to the set screw. The spout will turn and with pressure come about 3/4" off the wall. I don't want to pull any harder and twist because I think I may damage...
Read topics; still puzzled.blocked vent or blocked drain
[ 2 Answers ]
:confused:
Hi all. I just bought a ranch with a crawl space. My waste drain begins at my washer machine, past the kitchen sink, pass the bathroom tub and ties in with the main sewer line with the toilet and vent stack at the back of the main drain before it exits to the street at the front side...
Removal of tub spout diverter with hole underneath
[ 1 Answers ]
I have a tub spout diverter that has a hole in the bottom. I need to know what the mechanism looks like so I can figure out how to remove it and then unscrew it to put on a new one.
There is a hole in the bottom of the unit but it is too close to the wall and I can not look in it to see what...
Screw-on spout removal
[ 2 Answers ]
The diverter on our tub is failing. It diverts about 2/3 of the water so I want to
Change the spout. It is a screw on type with copper supply line. As I tried to
Unscrew the spout the copper supply line began to twist. I could see the pipe
Deform. I stopped not wanting to break off the...
Plumbing/screw removal mishap
[ 2 Answers ]
Plumbing Problem - had dripping faucet in bathtub. We were attempting to remove the screw that holds the handle in place, but srew was defective, so we drilled into it, reversed the drill to get the bit out, then used a screw extractor to remove the screw. The screw extractor broke off! (I DO...
View more questions
Search
|