Ask Experts Questions for FREE Help !
Ask
    swmbnm31506's Avatar
    swmbnm31506 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 8, 2009, 03:20 PM
    Troubleshooting thermostat
    I have a honeywell thermostat 7000 series. Some how it is stuck on permanent hold! I do not know what to do! I have the book but makes no sense to me!! It is getting cold! Please help!

    Thanks!
    EPMiller's Avatar
    EPMiller Posts: 624, Reputation: 37
    Senior Member
    		  
    #2

    Jan 8, 2009, 03:54 PM

    Is this the lo-volt (furnace, heat pump) or line volt (electric strip heat) model? If the lo-volt model, to get heat, set it to heat and push the up arrow until the heat kicks in. Push the button under RUN PROGRAM and it should go off hold. Of course then it might revert to a preset temp lower than you want until you program it. I don't have time to research the line volt unit.

    EPM
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
    		  
    #3

    Jan 8, 2009, 06:22 PM
    Could you give the model number of the stat?. I'll make time to research it. And what are you controlling with it?
    swmbnm31506's Avatar
    swmbnm31506 Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Jan 8, 2009, 06:44 PM
    Model number I can't find it! I have to look that up. But it is controlling my central heat and air! Thanks! I tried to research it but no luck for me.
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
    		  
    #5

    Jan 8, 2009, 07:53 PM
    If you have a "use schedule" button... pressing it should get you back to the program, cancelling the permanent hold.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troubleshooting Totaline Thermostat P374-1000 [ 1 Answers ]

I am trying to find out why my Totaline P374-1000 thermostat is blank. Does anyone know if this is just a faulty thermostat or is there an issue with the air conditioner?

Troubleshooting. [ 2 Answers ]

I'm trying to trouble shoot an older computer I inherited. I am completely new to PCs. At any rate it has two problems that are possibly relateed. 1. The image the monitor (I have tried 2 different working monitors) has a bunch of red (sometimes grey) vertical lines across the screen which...

Troubleshooting thermostat [ 6 Answers ]

Hi, I have electric heat--several zones. Yesterday I turned the bathroom thermostat way down because it was very warm. Not it doesn't seem to turn the heat on. I do have heat in other zones. It is a Cadet M411 thermostat. Any suggestions? Thanks for your help

Troubleshooting thermostat circuit [ 4 Answers ]

I came home from work and my girl railroaded me about the heat not working. Of course it's the first cold day in Saint Paul. Our thermostat is pretty old and missing its faceplate so I thought replacing it would be a decent first step. I bought a Honeywell programmable one for twenty five bucks...

Second HD troubleshooting [ 1 Answers ]

Ok, here's the skinny... Intstalled my girlfriend's HD (Maxtor DiamondMax Plus 9 80GB ATA/133 HDD) onto my computer as a 2nd HD(slave). All jumpers are set correctly, all cables are correct (not the 1st time I've done this). Everything works fine, it's detected and I do have access to it. ...

View more questions Search