Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
2005 ford Powerstroke 6.0 issue
[ 7 Answers ]
Thank you for you time.. I have recently purchased a used 2005 Ford 6.0 diesel turbo. Was running fine then all of a sudden the truck became sluggish and registered no turbo pressure or pressure sometimes. A well respected local mechanic told me that he believed it was due to a bad sensor. I...
Problems after fuel filter change on Ford F250 6.0 powerstroke
[ 8 Answers ]
I just changed the two fuel filters on my 2004 Ford F250 superduty 6.0 Powerstroke. After changing them my trucks turbo stopped holding boost. White and black smoke was coming out of the exhaut pipe when the turbo would blow off. What could be the cause of the problem?
Powerstroke 7.3 problems
[ 2 Answers ]
I took my 2002 Ford F 250 7.3 Diesel to the dealer for the recall of the cam sensor, maybe coincidence but twice now I have parked the truck on a slight slope nose down and after only 10 to 20 minutes it wouldn't start? The way I got it to start last time I removed the fuel filter. It started...
2005 6.0 powerstroke starting rough
[ 2 Answers ]
Any time the truck has been setting long enough for it to cool off when I start it it runs rough and if I don't let it set and warm up it has very little power and it shutters if I try to accelerate to quickly. I had it in the shop a while back and had the injectors checked, I had one bad and...
How to change fuel filters in 2004 f-250 powerstroke diesel
[ 1 Answers ]
I would like to know how to change the fuel filters on my 2004 F-250 powerstroke diesel engine. Just had it done at the ford dealer and the price was about $200. Can't afford that again! Thanks. View more questions Search
|