 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
This is likely the hot inlet port on the mixing valve gets clogged with degris from the hot water heater. Do you know how to disassemble the valve? If not a brand/model or picture would be helpful to is if we are going to help you further |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I recently purchased a small home, that I am getting ready to rent out the problem is I get water from the shower head just fine, but I get not water from the tub spout, any ideas?
I am getting no hot water to my shower or bath but I get hot water in my sinks. I have a combi boiler which got installed about a year ago with all new pipe work. The bathroom got installed about 17 months ago with a mixer shower. I have had no problems until recently. I have seen comments on...
I have a fiberglass shower stall where the bottom has either slumped or the stall was installed wrong to begin with (it has no support beneath the surface that I stand on). The drain sticks above the level line so I have about 3/16" of standing water. I cannot easily access the bottom from the...
Hey guys, this problem has been occurring for some time now, I finally found this website to finally ask the question and hopefully have an answer :).. Now I do not want to call the plumber in at this point, in case if it's a easy fix and would rather save the money, so please if you can help...
I have hot water in all my other faucets/showers. I also have hot water at the particular shower with the problem as long as a shower head is not installed. When I install the shower head, the water is lukewarm. Any ideas for the source of the problem, and how to fix?
View more questions Search
|
