Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Toilet empties when different toilet flushed
[ 11 Answers ]
Hi, I have a confusing problem.I just installed a new toilet in place of an existing one. The promblem is when I flush the new toto toilet, my other toilet bowl almost completely empties.. The 2 toilets are basically back to back, and use the same vent pipe through the roof.(3 inch copper).No pipes...
Water rushes up when the toilet is flushed into another toilet
[ 1 Answers ]
I have a 2 storey layout house. The guest restroom on the ground floor is exactly below the Jack and Jill Washroom of the top floor. It looks in both the restrooms the toilets share the pipe line The problem is when someone goes to restroom on the ground floor , the top floor toilet gets...
Anti-syphon hose bib
[ 2 Answers ]
We had a new hose bib put in for our outside hose. It worked fine for a few weeks, but now no water comes out at all. Is there some trick to getting the water started with the anti-syphon hose bibs? Thanks!
New toilet
[ 1 Answers ]
I finished my basement and the home was plumbed for a full batch. I have a 4" pipe coming up through the concrete floor for the toilet. The flooring has been laid up and around the pvc pipe. First, do I need a 4" flange for the toilet? Second, how far down do I cut the pipe coming up through...
Toilet
[ 1 Answers ]
I started smelling sewage in my basement bathroom, and when I looked in the toilet, it had no water in it(none on the floor) It was used the previous day. When I flushed it, it seemed to be normal and stay at the correct level. I came back and checked about a half hour later and still seemed fine. ... View more questions Search
|