Ask Experts Questions for FREE Help !
Ask
    monkey888h's Avatar
    monkey888h Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 28, 2008, 04:33 PM
    Amana furnace not staying ignited
    Have an amana high efficiency furnace that has the electronic iginition and it will ignite and stay burning for about 30 seconds than turn stop.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Dec 28, 2008, 05:04 PM

    Clean flame senser. Does the led on the control board flash any sequence when failure occurs? If so, you can look up the code in the instructoin manual. Please let us know more.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace won't stay ignited [ 3 Answers ]

I have a coleman evcon furnace. It will start with a 30 second purge but then go out. Sometimes it works just fine. What's my problem?

Furnace pilot not staying lit [ 6 Answers ]

The older sears furnace here, has a pilot light that lights But goes out, as soon as the pressure on the pilot button is released. Now two times it did stay lit and then soon went out. If the orifice needs cleaning are there diagrams of where that is or how to do that? Thanks

Furnace not staying on [ 1 Answers ]

I have a 10 year old Amana (GUD070X30B) , White-Rodgers 50A50-288 Control. The thermostat calls for heat, the gas turns on and runs for approx 15 minutes then the gas shuts off but the thermostat is still calling for heat. The inducer motor is still running and the diagnostic light is 3 Blinks...

Furnace won't stay ignited [ 2 Answers ]

We just replaced our thermostat and ever since then the heat will come on and is ignited but still blowing cold air.

View more questions Search