Ask Experts Questions for FREE Help !
Ask
    winstontripp's Avatar
    winstontripp Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 26, 2008, 10:32 AM
    Remote works the fan but not the light
    Fan works light will not work( on only.) the wall switch has two switches. I wired one hot lead up .do I need to hook up bouth leads?
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #2

    Dec 26, 2008, 12:38 PM

    How did you wire it?

    Ceiling fan wiring - Ceiling Fans N More

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Harbor Breeze remote fan works not light [ 6 Answers ]

I have a Harbor Breeze ceiling fan with a remote control only. The fan part works fine but the light does not work with the remote. What can I do to fix this problem. Thanks, Robert

Remote works, light works, fan humms does not turn [ 2 Answers ]

Hello, I have a Hamton Bay fan with a remote/no pull chain. The light on the remote comes on and does properly operate the light on the fan. It also turns on and off a humming noise but there is no movement from the fan itself. Of course, the house did not come with an owners manual. Is...

Remote works for fan, not light [ 4 Answers ]

I just installed a Hampton Bay Caswyck ceiling fan. The remote works fine on the fan, changes speeds, on and off. The remote will not turn the lights, top or bottom, on. I've checked the wiring, everything is tight. What do I do now?

Hampton Bay Fan w/ Remote: Light Works, Fan Doesn't [ 4 Answers ]

Sorry if this has been answered elsewhere but I couldn't find what I was looking for. I just installed a Hampton Bay Andover fan w/ remote (no pull chains) but the fan won't start. The light fixture works fine (using the wall switch remote) but I can't get the fan going. I tried the reverse...

Hampton bay fan remote works the speed not light [ 3 Answers ]

I installed this fan OK... it was fine for 2.5 years now the remote only works the fan speed. It does not work the lights. I removed the fan and checked connections which are good.Luckily the fans lights are in the on position and POWER is through a wall switch,that controls the lights. But I wish...


View more questions Search