Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Circulating Pumps - submersible pumps - low efficiency
[ 1 Answers ]
Hello people, Well I was selecting some hot water circulating pumps and submersible pumps, for a rather big project. I consulted GRUNDFOS (can't get bigger than that). For the hot water circulating pumps, Grundfos informed me that the best selection according to my (flow, head)...
Ejector pumps
[ 1 Answers ]
I have a ejector pump system in my basement that is being fed by a toilet and I want to know if it's o.k. to use reglular toilet tissue or other,special paper that will dissolve with water. Do chemicals need to be added to tank?
Ejector pit
[ 1 Answers ]
Hello, selling my house and the "home inspector" suggested to the buyers that the ejector pit should be sealed, mine handles only laundry water and wash tub and is a standard type sump pit with a plastic lift of lid that has a slot half way through for the pipes. What would be the proper way, and...
Ejector Pit Smells!
[ 3 Answers ]
I have an ejector pit in my basement with a shower, washer, and toilet draining into it. The top is bolted down and the pvc has snug rubber fittings where it passes through the top but the odor is still strong. Is there any thing I can do to control or reduce the odor?
Basements/ejector pumps/washers
[ 11 Answers ]
A twist on a familiar question posted here... I am attempting to move my washer/dryer into my basement. It is rough plumbed for a bath, with a 4 inch waste line dumping into a sewage ejector pit. Can I cut a tee into that 4 inch waste line and route my 2 inch washer drain line into it? I am... View more questions Search
|