 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
KitchinAid Control Board
Control board on KitchenAid dishwasher is bad. Old part number is Whirlpool 8269187 and is replace with slightly redesigned part number 8564542. Connectors are different. How can I replace the part with existing wiring? Model number is KUDM01TJBL0.
|
||||
|
||||
|
In the kit there should have been instructions or adapters. Or according to this you might have the incorrect timmer. There number is CNTRL-ELEC (USE WPL 8564543) You have 8564542but the 8564543 subs for the other number. Very confusing indeed. No where in the information does it say anything about adapters for the wiring so I would be making a phone call to where ever you got the part from for a answer on this.
Whirlpool Appliance kudm01tjbl0 Parts List |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Carrier 58PAV that intermittently aborts or sometimes clicks on and off at the draft blower stage. I found out I can move the control board (HK42FZ007) when the blower motor clicks off, and it clicks and comes right back on. If I hold it just right, the furnace starts and if I manage to...
I'm working on a forced hot air furnace that's in a basement that got flooded and the furnace was only on 2-4 so it looks like the whole blower motor and control board transformer got flooded. I responded to a no heat call today check the unit the unit won't do nothing, it has power coming from...
My control board seems to not be working the light won't come on it is a goodman 90% furnace I do not have the home owners book for it
Can I buy a control board at Lowe's or Home Depot or do I have to order?
Can the board be repaired or do I need to replace it
View more questions Search
|
