Ask Experts Questions for FREE Help !
Ask
    cubbyfan's Avatar
    cubbyfan Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 17, 2008, 09:51 AM
    Furnace won't turn on
    My mother in law has a Goodman furnace (model unknown) that keeps going out.

    She has had a Technician out twice in 3 days. The first time he replaced the pressure switch the second time said the unit was overheating causing it to shut down and made the necessary adjustments. I cleaned the flame sensor.

    It works for a short time and then shuts down. She has to manually power off the unit wait a while power it back for it to start working.

    She is retired on a fixed income and can't afford the $90.00 per visit the technician wants to charge.

    Any suggestions?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Dec 17, 2008, 10:46 AM
    The service person should be coming back for free since they never did fix the problem.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace will not turn on [ 1 Answers ]

I have a Goodman furnace that we just replaced the vent motor on. It worked fine for about 2 hours and then it came on but would not ignite. The fan comes on and several seconds later you hear a click but the ignitor does not glow. I sucked on the line going to the pressure switch and it seems...

Gas Furnace Won't Turn On [ 1 Answers ]

We have a Lux gas furnace that isn't working right. We woke up to a much colder house than we had planned. We've reset the thermostat several times and tried several configurations to no avail. We finally heard the heater kick on when we switched the fan button from "auto" to "on". This made...

NG Furnace will not turn on [ 2 Answers ]

Make: RHEEM Model: RGDO 06NC ER Installed: 1990 Problem: Observe glow in burner area from ignitor but the gas won't turn on. After a few seconds the glow will turn off. The Hot Surface Ignition Module was replaced in 1997. Please advise.

Furnace won't turn off [ 2 Answers ]

Our furnace won't turn off. I turned the heat off at the thermostat and no luck. I changed out the thermostat with a new one and it is doing the same thing. If the breaker is off, the fan and heat are off; is the breaker is on, the fan and heat are on even if the thermostat is set to off. We...


View more questions Search