Ask Experts Questions for FREE Help !
Ask
    PolkSalad's Avatar
    PolkSalad Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 14, 2008, 08:13 PM
    GE DDP1380 Dryer cuts out before clothes is dry
    We have a GE Spoacemeker DDP1380 dryer that shuts down before the clothes is dry. We then have to wait about 30 to 60 minutes, presumably to let it cool down, before we can start it again to finish the load. Is there perhaps some sort of overheat sensor perhaps on the motor somewhere that could be replaced? Thanks in advance for any information.
    hoops4jc's Avatar
    hoops4jc Posts: 5, Reputation: 1
    New Member
    		  
    #2

    Dec 14, 2008, 08:50 PM

    If this dryer is not new you could try to take the back off the dryer and clean out the whole lint trap duct. If there is a lot of lint or other things that can cause the dryer to stop before it should
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Clothes dryer [ 3 Answers ]

My kenmore dryer isn't getting hot to dry clothes

Clothes dryer [ 4 Answers ]

Dryer runs fine but doesn't heat Thermal fuse? Or heating element?

How old is my clothes dryer [ 4 Answers ]

I have a JC Penny clothes dryer, model #86150350000 serial #ah300903f. How old is it?

Hot clothes dryer [ 1 Answers ]

The top of dryer is hot, the vent pipe from dryer to the wall is to hot to touch. What is the cause of .

Whirlpool gold senseon dryer cuts off several times during drying [ 1 Answers ]

This dryer turns on, gets hot and cuts off by itself after several minutes or sometimes dries for longer or shorter times but needs to be turned on several times before the clothes finally get dry. Its not the lint filter. Does anyone know what is causing this? Thanks.

View more questions Search