Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset
[ 5 Answers ]
I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...
Goodman Furnace that is not lighting
[ 13 Answers ]
I have a Goodman Furnace that is not lighting. Of course it is over the weekend and it is -25 windchill below outside... it truly is. I cleaned the sensor. Anyone have any ideas? Dan
Goodman Gas Furnace not lighting
[ 3 Answers ]
We have a GMT or GMTH Goodman Power Vented Gas Furnace. Yesterday the gas stopped lighting up. We think it might be the ignitor. Our home is 4 yrs old. When we turn the thermostat onto heat, the furnace fan comes on, but no fire. Any suggestions? Weird is that when it is on auto, it won't...
Goodman furnace
[ 5 Answers ]
The furnace comes on and the furnace ignites. It then burns for a few seconds and goes off without the fan coming on. I have changed the flame sensor. Didn't help. Also the fan will come on by itself without the furnace coming on. Help!!
Goodman furnace
[ 17 Answers ]
I have a goodman furnace. Forced air. No a/c. I turn the power on and she starts. Thermostat is off. No wires are crossed that are visible. The pilot does not ignite but the heating element is on. No gas seems to be coming through. Any suggestions? The furnace is only a year and a half old. View more questions Search
|