Ask Experts Questions for FREE Help !
Ask
    ejej4444's Avatar
    ejej4444 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 14, 2008, 04:24 PM
    Pilot on furnace on but burners won't come on
    My furnace is having some trouble. The pilot is on but the burners won't light. I was wondering if there is a simple solution to this problem. I'm trying to avoid expensive fixes if at all possible. Any help is greatly appreciated. Thanks.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Dec 14, 2008, 08:01 PM

    Take the wires off tstat ,the w and the red jump them together,, this will by-pass the tstat if furnace works you have thermostat probs.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #3

    Dec 14, 2008, 08:06 PM

    Will the fan run if you turn the fan switch to ON. Are you sure that you have electricity to your furnace. And if you do have 120 volts are you sure that your transformer good.

    Answer some questions for us and we will try to help.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier heating unit, we lit pilot but others burners will never light and so we have [ 1 Answers ]

:confused: We are freezing to ice cubes here, please someone help us with an answer. We lite the pilot on our Carrier system just as the instructions on the panel say to do, but when we turn it to on nothing happens. The blower blows cool air. The burners are not lighting inside. Last year...

Goodman pilot light on but furnace burners will not come on? [ 4 Answers ]

We have a Goodman furance that will not produce heat. The pilot light is on, the gas is released, but the burners will not kick in. Do you have any idea what is causing this problem.:confused: Scott's Chicago

Furnace pilot is on, but burners do not ignite [ 1 Answers ]

I have a Carrier furnace 201BB and the pilot comes on but theburners do not ignite all the time. What can I do. Is there a part that needs changed. HELP

Gas furnace has an intermittent pilot, pilot lights, furnace tries to start [ 3 Answers ]

Have a 25 plus year old furnace pilot will start when signal sent furnace tries to start makes noise as it tries over and over but will not start. Thanks

Furnace trouble. Pilot lights. Burners light but then go out. Evetually stay on [ 2 Answers ]

Hi all, I searched through this site a bit and found some helpful topics, tried a few things and I'm still have the same trouble. I have a Bryant furnace that uses a Johnson Controls G779LHA-1C Ignition Control. The ignition control is new, I just replaced it a week ago. It's hooked up so...

View more questions Search