Ask Experts Questions for FREE Help !
Ask
    jmatsey's Avatar
    jmatsey Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 14, 2008, 09:52 AM
    Kenmore Elite Total Care System with Even Heat
    I have a repeated problem with this dryer. When pushing the start button, the dryer will not continue to run (it will only run while I am depressing the start button. After repeated attempts, moving the other control knobs and unplugging the machine, it eventually starts working normally. Any suggestions as to what the problem is and what I can do to fix it?

    Thank you.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 14, 2008, 11:28 AM
    It could be in the motor start/run switch located on the motor itself.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Dryer won't heat [ 16 Answers ]

I have a heavy duty Kenmore Elite dryer for about 5 years (bought new) but it doesn't heat now. Power works fine. The inside part turns/tumbles fine. Light works when you open the door. We clean lint out each time. Just doesn't heat on any of the dial settings. I've switched power at the...

Kenmore Elite Dryer Won't Heat [ 1 Answers ]

I have a Kenmore Elite dryer that doesn't heat now. Power works fine. The inside part turns/tumbles fine. Light works when you open the door. Replace ignitor and cleaned all vents. Just doesn't heat. It's an electric dryer. Model number 110.73022101 Recommendations? Thanks!

Kenmore Elite gas dryer won't heat [ 5 Answers ]

I have a Kenmore Elite Gas Dryer model number 110 72056 100. When I select a cycle to dry; they dryer turns, the air is blown out of the house; :confused: however, it is cold air even though I have selected a hot air cycle. Please let me know if you know what could be wrong with this. ...

Kenmore Elite Total Care System [ 3 Answers ]

I purchased a used dryer the owner told me it is 5yrs old, the problem is it works but it takes half a day to dry a load. So its does eventually dry but it takes a looong time. I did swith out the cord to fit the outlet I already had, but that's it, I 'm not @ home right now so I don't have the...

View more questions Search