Ask Experts Questions for FREE Help !
Ask
    JCLARK3572's Avatar
    JCLARK3572 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 8, 2008, 05:47 PM
    John deere LA130 lawn tractor
    I have a la130 john deere lawn tractor and I disengaged the mower while engine was running and now the mower won't start. What can I do to get it started?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Dec 12, 2008, 06:48 PM

    Hi,
    I do not get the question. That model has an electric clutch which would normally be disengaged before stopping engine. Make sure the button of the clutch switch is pushed in. If it is make sure brake is depressed(ther is a switch there also.) That all being the case, open the hood and look to the rear of the engine on the left side. The brake switch is there and could have broken free or come loose from its mounting bracket(it has the five wires going to it.)
    If not any of those, post again.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John Deere LA130 Will not move [ 2 Answers ]

Hello, I am stumped. I have looked at the LA110 "will not move" posts and have tried all the suggestions but nothing is fixing it yet. I have a several year old JD LA130. I was in the process of mowing the lawn when I slowed down to turn, when I finished the turn I could not accelerate, or...

John deere 160 lawn tractor [ 2 Answers ]

I have a john deere 160 lawn tractor that won't start. Was running great. Next time zi went to use it, it wouldn't start. Pulled the plug it didn't look bad but I replaced it anyway. Still no start. Checked and no spark. Bought a new coil still nothing. Gap is good on the plug and the coil. Nothing...

John Deere 160 lawn tractor [ 2 Answers ]

I had to replace the belts in my tractor, and hence had to remove the clutch etc. to do so. Now that I have it back together, the clutch does not disengage the belts and stop the tractor correctly. I assume this is either an adjustment on the clutch, or the belt itself. Can anyone help with this??...

John Deere 318 lawn tractor [ 2 Answers ]

Hi I was wondering how I can get a wiring diagram for a John Deere 318 lawn tractor? I have found everything on the web except the diagram.

View more questions Search