Ask Experts Questions for FREE Help !
Ask
    mikecarsten's Avatar
    mikecarsten Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 11, 2008, 04:49 PM
    fluorescent light wattage
    How do I calculate how the wattage required to run a 2' x 4' (4-4' light tubes) fluorescent fixture (mounted in a drop ceiling, if it matters)? I also need to calculate the wattage for several 2' x 2' fluorescent fixtures. Any help in this matter is greatly appreciated.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #2

    Dec 11, 2008, 06:04 PM
    Look for the amp rating on the ballast.

    If necessary to convert into watts, actually called Volt-Amps (VA)

    Multiply 120 volts, or the supply voltage you have, by amps to arrive at watts (VA)

    Do not add the wattage listed on the lamps.
    ValRoseWW's Avatar
    ValRoseWW Posts: 2, Reputation: 1
    New Member
     
    #3

    Jul 24, 2010, 06:31 PM

    Are you saying the power consumption (wattage) is strictly a function of the balast, not the wattage of the tubes?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #4

    Jul 25, 2010, 06:01 AM
    The total power consumption of a fluorescent fixture is a combination of the lamps AND ballast.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #5

    Jul 25, 2010, 06:10 AM

    Like TK originally stated, the rating of the ballast is indicated right on it in amps. Multiply this by 120 and get the watts.

    This number includes the lamps plus whatever the ballast itself draws (which is minute).

    If the ballast is rate for several different lamps you DO have to take that into account.
    ValRoseWW's Avatar
    ValRoseWW Posts: 2, Reputation: 1
    New Member
     
    #6

    Jul 26, 2010, 07:00 PM

    Thank TK and stan, stan your explanation drove it home for me.

    I am interpreting from a few posts at this site, two possible formulas:
    1. Watts = (# tubes * tube watts * 1/ballast efficiency) + (ballast amp x supply volts)
    2. Watts = input amp & supply volts

    The problem is getting the specs to plug into either formula. I am trying to decide on purchase of shop lights. For example there are 4 electric ballast light fixtures at the big box that range in price from $12 to $40 for 2 tube x 4’ x T8 x 32 watts. None have shields; they do vary slightly in reflector. There are similar variations for 8’ units. There are no specs on the boxes or units other than the examples stated above. It is not possible to open the units to read the ballast specs (input amp, input watts, BEF, ballast factor, etc.). How does one determine the difference in power consumption, whether comparing T8 units to each other or versus T12 or T5, etc?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Fluorescent light humming [ 1 Answers ]

I have a circuline fluorescent fixture in my kitchen. It started humming today, I think it may have been left on for several hours(kids). Any suggestions?

Installation of pull chain to fluorescent light [ 4 Answers ]

I have a 40W fluorescent light that I intend to hang over head and plug into an outlet that is not hooked to a wall switch. This fixture is a 2 light fixture. I purchased a pull chain switch but I am confused about where to splice in the 2 black wires on the switch. The instructions...

Hampton Bay Ceiling fan fluorescent light [ 1 Answers ]

Fan works. Fluorescent light not working despite changing bulb.

Problem with a fluorescent light [ 1 Answers ]

We moved into a house that has fluorescent bulbs in the bathroom and we've never had them before. When we changed to bulbs, they don't light up all the way. What are we doing wrong?:confused:

Fluorescent Light [ 3 Answers ]

Hi, I just replaced a light and the FS 2 part on my light. Works fine but the bulb keeps going on and off. An fs 2 is for 20 watt and thqt is what I HAVE Chuck


View more questions Search