Ask Experts Questions for FREE Help !
Ask
    eduardo fontani's Avatar
    eduardo fontani Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 10, 2008, 04:39 AM
    Bryant Furnace Model # 582ANW024060AAAD
    Bryant Furnace Mode No. 582ANW024060AAAD furnace after running for about 30 min. backfires and eventually the furnace will stop while the blower continuos to run. To be able to restart the furnace you have to turn off the breaker and furnace will backfire again before it will stop.

    >Moved from Forum Help<
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 10, 2008, 10:47 AM
    If this furnace is backfiring call for service NOW. Unless you would like to take the time to explain backfire since it is not a exact known term in the HVAC trade unless it is serious trouble.
    MarkwithaK's Avatar
    MarkwithaK Posts: 955, Reputation: 107
    Senior Member
    		  
    #3

    Dec 10, 2008, 08:30 PM

    I would almost bet that you find a crack in that heat exchanger.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Dec 10, 2008, 09:09 PM
    I bet you are correct. There goes the kids Christmas presents.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant Furnace model 383KAV won't kick on [ 10 Answers ]

I'm not getting any error led blips from the computer board. I can only see one limit switch which isn't tripped. I replaced the thermostat but that wasn't it. I've checked breakers and even tried tripping them off and then back on. Usually if I remember right this furnace goes through a...

Bryant gas furnace model 383 KAV sometimes does not run [ 6 Answers ]

I have a 10 year old Bryant gas furnace model 383 KAV that sometimes does not run. The inducer motor does not come on and there are no codes. If I cycle the power several times it will eventually all work normally at least until the next morning when it may or may not restart after being off at...

Bryant Model 350MAV Furnace [ 3 Answers ]

Hi, I recently had a furnace repairman in who told me our inducer on our Bryant Model 350MAV furnace needed to be replaced. He said the total cost would be $1075.00, including $890.00 for the inducer. This seemed high to me. Can anyone give me an idea of what this repair should have cost,...

Location of the flamer sensor in a Bryant Model 383K Furnace [ 3 Answers ]

Where is the exact location of the flamer sensor in a Bryant Model 383K Furnace? Is there a better diagram than I currently have in my user's manual? It is really for the installer. I know that I need to sand down/ steel wool the flame sensor, but can't remember the location. Thanks in...

View more questions Search