Ask Experts Questions for FREE Help !
Ask
    peekster's Avatar
    peekster Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 10, 2008, 09:25 AM
    Furnace lights - doesn't stay lit
    Furnace cycles, ignitor works, flame sensor is fairly new, but flame does not stay but just a few seconds. Light blinks 7 times. Are the burners bad? Would it still light at all if they were bad?

    Anxiously awaiting your response! Thanks!
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 10, 2008, 10:38 AM
    Copy
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My intertherm furnace pilot lights but furnace won't kick on [ 5 Answers ]

I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...

Furnace trouble. Pilot lights. Burners light but then go out. Evetually stay on [ 2 Answers ]

Hi all, I searched through this site a bit and found some helpful topics, tried a few things and I'm still have the same trouble. I have a Bryant furnace that uses a Johnson Controls G779LHA-1C Ignition Control. The ignition control is new, I just replaced it a week ago. It's hooked up so...

Lights stay on [ 1 Answers ]

On a 97 jeep grandcherokee the head lights stay on at all times the only way to turn them off is to pull the fuse but put the fuse back in the lights come back on and the high beams don't work. I think it's the switch but not sure.

Hampton Bay fan, lights stay on? [ 2 Answers ]

My dad has a Hampton Bay remote controlled fan with upper and lower lights The problem is the remote will not turn off or on the lower lights My dad found this out when he tried to turn off the light last night, it stayed on until I could unscrew the bulbs. I tried the battery its good and...

View more questions Search