Ask Experts Questions for FREE Help !
Ask
    richmar's Avatar
    richmar Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 10, 2008, 02:35 AM
    Thermostat wiring
    My old therostat was a two wire round honeywell mercury one. I have installed a honeywell rth7600 and want to make sure the wiring is correct. Any suggestions on where the two wires connect to the new thermostat?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Dec 10, 2008, 03:43 AM
    Use W and R treminals.


    http://customer.honeywell.com/techli.../69-2206EF.pdf

    Make sure you do the setups as required in the manual for your type of unit etc.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring codes from old Carrier thermostat to new Hunter thermostat [ 1 Answers ]

WIRING CODE HELP FOR THERMOSTAT I am in an office and have an old Carrier programmable thermostat which no longer works. I purchased a Hunter 44660 thermostat to replace. My problem is that the wiring codes on the previous thermostat do not match up the codes on the new thermostat. Codes and...

Thermostat Wiring - From Two to One Thermostat [ 4 Answers ]

Currently my central a/c unit is hooked up to a Honeywell CT3500 Programmable Thermostat. I've noticed that the thermostat can handle heat as well as cooling. My furnace is hooked-up to an older manual thermostat. It is a simple 2 wire set-up - red & white. Could the furnace be hooked-up to the...

Wiring direction for a multi wiring system thermostat! [ 3 Answers ]

I have a 2 wire system (3 phase), need to connect multi wiring system thermostat! Need to know if, its correct to just use line#1, and the device already has a jumper?

Honeywell wiring different from old thermostat wiring [ 2 Answers ]

I purchased a non-programmable digital thermostat to replace an analog thermostat with wiring red, white yellow and black. How do I match the wiring? HELP!!

New Thermostat Wiring [ 3 Answers ]

Hi everyone. I currently have a hunter thermostat that's digital but am replacing it with a newer honeywell rth5100b. Here's my question: The old thermostat has the standard 4 R G W Y terminals with their respective wires connected to them. However, there is a 5th wire ( blue in this case)...


View more questions Search