Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring help
[ 1 Answers ]
We are trying to hang a ceiling fan in our bedroom. We ran into some problems and had to put in a new electrical box causing us to cut some wires. We now have no way to connect these wires back up to complete connection. The wires are older and are the thick copper wires making the use of a wire...
Wiring Help
[ 4 Answers ]
I'm wanting to run electric from garage to shed. Want to have an outlet always hot and a light controlled by a switch. How do I do this? Any help and diagram appreciated. :confused:
Help with wiring
[ 6 Answers ]
Hi Folks, I am building a vivarium and need some help re wiring plan. I am going to have a piece of board with 8 standard single wall plug sockets and switchs on it which will be attcahed to the back of the vivarium. Now I want to wire them so they can be used as normal but the only source of...
Wiring with 15 amp
[ 1 Answers ]
In some work on my house, I noticed a light had 20 gauge wire feeding it from a 14 gauge line. The breaker on the 14 gauge is 15 amp. Is this type of hookup OK?
J: not accessible. Parameter is incorrect.
[ 2 Answers ]
Hi, I recently bought a Maxtor 200 gig 7200rpm DiamondMax 9 SATA 6Y200MO, and partioned it using the maxtor software into 2x 100gig partions, to find out that after copying files to one section of the partion they all corruppted and now the hdd displays this message, J: not accessible. Parameter... View more questions Search
|