Ask Experts Questions for FREE Help !
Ask
    nuzimom's Avatar
    nuzimom Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Dec 6, 2008, 12:07 PM
    Hunter Ceiling Fan Switches
    I replaced the pull chain switches on both my ceiling fan and light kit. When I pull the chain on the ceiling fan, it changes speeds but does not turn off. Same thing on my light kit... when I pull the chain, the light does not turn off. I have to turn them off by the light switch.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Dec 6, 2008, 01:06 PM

    You did not replace the fan pullchain with the correct replacement. Order the correct replacement from Hunter Fan - Ceiling Fans, Air Purifiers, Humidifiers, Thermostats

    Ceiling fan pull chain replacement and repair - Ceiling Fans N More
    nuzimom's Avatar
    nuzimom Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Dec 6, 2008, 03:42 PM
    I'll try that. I got the part from Home Depot.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Dec 6, 2008, 10:01 PM

    A lot of them look the same, and connect the same, but are not the same.
    nuzimom's Avatar
    nuzimom Posts: 4, Reputation: 1
    New Member
    		  
    #5

    Dec 7, 2008, 06:31 AM

    My old switch is a WELL TEC E116997. I know the Westinhouse 77020 is not compatible. Does anyone know what model is compatible?
    nuzimom's Avatar
    nuzimom Posts: 4, Reputation: 1
    New Member
    		  
    #6

    Dec 7, 2008, 06:37 AM

    I just searched this site and found the replacement model... thanks!
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #7

    Dec 7, 2008, 02:31 PM

    Sometimes the model numbers are the same but the switch isn't. Order it from Hunter.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ceiling Fan/Light from 2 switches to 1 [ 4 Answers ]

We are installing a ceiling fan/light. One wall switch controls the light; the other controls the fan. However, the unit came with a wall switch that controls them both, rather than separately. How do we combine the two switches so that the light and fan operate on the one control which came...

Installing Hunter Remote w/ Existing two wall switches [ 6 Answers ]

Do I ignore the red that exists in the existing ceiling with the black, white, and ground? The red goes back to one of the switches. Does it matter which I use (black or red)? I removed an existing ceiling fan and installing another with a Hunter remote. Thanks

Hunter Fan Installation Where there are 2 wall switches [ 5 Answers ]

I'm replacing an old ceiling fan with a Hunter fan and light. The fixture is positioned between wall switches on opposite walls and has two incoming black and white wires. The old fans I used in this room had a black wire, a white wire and a ground and all like colored wires were simply wired...

Where For I find the dip switches in the ceiling fan? [ 1 Answers ]

I Have A Harbor Breeze Ceiling Fan/light With A Remote. I Recently Replaced The Remote Thinking That Was Why It Wouldn't Work Anymore, But It Still Is Not Working Even With The New Remote. Teh Dip Switches Match The Old Remote. I Am Wanting To Know Where The Switches Are In The Fan Itself So I...

Ceiling fan with 2 speed control switches [ 7 Answers ]

Hi, I was wondering if it was any way possible to hook up 2 control switches to 1 ceiling fan? The fan is at top of stairs and connected to a high ceiling so if this were possible it would be so much of a convenience instead of always running up the stairs to turn on fan. Any help would be greatly...

View more questions Search