Check out some similar questions!

jackofall786 · Dec 4, 2008, 07:47 AM

Two out of four heating elements in my 5years old GE electric range are not working. I have changed the sockets and new elements. Still no electricity is reaching the sockets. Before I, start the major surgery; can some one please tell me if there is a fuse, which may be blown, or what seems to the problem? Where should I look? Thanks:confused:

KBC · Dec 4, 2008, 08:13 AM

Might be a defective infinite switch (located behind the control panel, with the burner knob on its shaft). Replace the switch if found defective.

If not,what model # and I will look for a site for it.

KBC

jackofall786 · Dec 4, 2008, 11:01 AM

KBC
What is probability that both switches are bad? Also I am sorry it is not GE but Frigidaire
Electric Range. Could not found the model number! Again, is there a fuse in ranges? :confused:

KBC · Dec 4, 2008, 11:04 AM

I'll look for frigidaire info,be back to you soon.

KBC · Dec 4, 2008, 11:09 AM

Instead of me guessing at the problem here are a few sites you can look into.

I like this one best:
Frigidaire Electric Kitchen Range Troubleshooting, Problems & Support by FixYa

Or this one:Frigidaire.com Site Index

Good luck:)

jackofall786 · Dec 11, 2008, 08:02 AM

Finally I dare to open the back panel of the range and with the help of multi meter, found that switch was not getting the voltages. I took out the switch and there are 5 connections. On the switch only these
3 numbers make sense. They are 316436001,NL812448 and 0518301. Also there is a monogram saying SA. Other things are 240V, 2100-2500W and 8.8-10.8A. Assembled in Mexico. (Of course)
Any idea where can I find it and how much? Thanks
:confused:

KBC · Dec 11, 2008, 08:15 AM

Frigidaire Range Parts - www.myshoppinglinks.org - Search

Any one of these sites will be helpful to finding the exact parts.

Hope this helped:)

KBC

jackofall786 · Dec 11, 2008, 02:12 PM

Thanks KBC. Excellent site for parts. Cost me $16 each.