Ask Experts Questions for FREE Help !
Ask
    glbcsanger's Avatar
    glbcsanger Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 4, 2008, 10:06 AM
    Forced air gas furnace
    I have a Rheem forced air gas furnace. The pilot will light manually and will run properly for a while, but it cuts off before reaching temperature and the pilot goes out. I've relit it several times, but it keeps doing the same thing. Any suggestions?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 4, 2008, 11:08 AM
    Since Rheem makes so many different kinds of furnaces and they change every year it is difficult if not impossible to answer your question. More information is needed.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Forced air fan will not shut off on furnace [ 1 Answers ]

My electric forced air colman furnace does heat and all, but the blower or fan will not shut off. It go continually. I even shut the furance off but the blower srill continued to blow air. What can be the problem?

Forced air furnace [ 1 Answers ]

When the furnace goes on, it does not automatically shut off. I have to shut the furnace. What could the problem be?

Intertherm forced air furnace [ 1 Answers ]

My furnace has not been working right since I replaced the oil filter and nozzle. I have adjusted the igniters properly and cleaned them up and polished them but when it ignites it rumbles and when I take it apart there is oil on the nozzle and igniters. I have cleaned this several times and was...

Forced air furnace [ 1 Answers ]

;) Gas forced air heating, I like to know if there is a way to change the temperature difference between stop and start, for example instead of 68-start and 73 stop change too 70 start and 73 stop ,

View more questions Search