Ask Experts Questions for FREE Help !
Ask
    transam2000's Avatar
    transam2000 Posts: 2, Reputation: 1
    New Member
     
    #1

    Nov 30, 2008, 01:18 PM
    Wiring a carport to the house?
    We are in the process of building our house and have run into a snag that we are unsure about. We have electric wired in our carport and not sure how to connect it to the house- keeping in code. Can we just run it through the outside walldown near the floor/ground or is it better to run it through the joist into the loft of the house?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #2

    Nov 30, 2008, 04:12 PM
    Not seeing the actual situation it is impossible to tell from here.

    Who is doing the wiring? Don't they know how to do this?
    transam2000's Avatar
    transam2000 Posts: 2, Reputation: 1
    New Member
     
    #3

    Dec 7, 2008, 01:10 PM
    We are building it ourselves. We figured most of it out and I had an electrician come through and made sure it all looked good and would pass code. Now onto the heating and AC duct work...

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wireless spy camera set in carport [ 1 Answers ]

If I bring the receiver from the carport to the family room. About 50feet. I have a small TV, with only the antenna out fitting in the back. Do you think I could hook It up to the TV??

Disassembly of metal carport [ 1 Answers ]

Has anyone successfully disassembled a two car metal carport and moved it? In what steps and order did you take it apart?

How to Attach Ledger Board for Carport [ 6 Answers ]

Good day, I'm building an attached carport at my friend's house. There are four posts and a beam for one side, and an attached ledger board as the other support. This is to be attached to the side of the house. My question: Should the siding (which is about 1/2" thick plywood) be cut out...

House Wiring [ 2 Answers ]

What is the aluminum gauge equivalent for #10 gauge copper?


View more questions Search