Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New hot water heater installed, but no hot water pressure. Plenty of cold water?
[ 11 Answers ]
Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....
Surging water pressure & leaking water heater relief valve
[ 19 Answers ]
Just recently the pressure of our water in the house surges when we turn a faucet on, and the city water company verified that our pressure in the house when we open a faucet is higher than the pressure in the lines in the street, and after the water runs is at a normal pressure (meaning their...
Connecting a tankless water heater and separate hot water heater
[ 6 Answers ]
What I have is this. An oil fired boiler that generates hot water for my house baseboard heating system. Contained within the boiler is a tankless heater that is heated by way of the firebox in the boiler. The tankless heater is used only for domestic hot water. It has a separate CW supply to the...
Reduced water pressure after installation of new water heater (entire house)
[ 6 Answers ]
Hello, We just had a new water heater installed yesterday and the water pressure seems to be reduced (probably 85-90%) of the prior level, through out the entire house. Our old water heater started to leak yesterday AM, had the new one installed that afternoon (40 gallon, 9 year wty, gas: GE...
Hot water heater is overflowing
[ 3 Answers ]
Hey guys, I think my hot water heater from time to time has overflowed a little bit (few drops here n there), but recently, I turned it up all the way to the max HOT since we now have 3 people showering in the morning at the same time. Of course, this didn't help and the water overflowed pretty... View more questions Search
|