Ask Experts Questions for FREE Help !
Ask
    toanka's Avatar
    toanka Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2008, 11:24 AM
    Low bat message on thermostat
    The batteies ran low on my thermostat. I replaced them with new batteries but I still get a low bat message and my heat won't turn on
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Nov 29, 2008, 11:30 AM

    Some stats require you to reset them after changing the batteries. How, where? Look for the manual of your stat.

    Even my wrist watch requires me to do that.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Low Battery message on Maple/Chase Thermostat [ 8 Answers ]

I had a "low battery" message flashing on my Maple/Chase 0960T-1 programmable thermostat. When I replaced the batteries the low battery message remained on the display but this time, it was not flashing back and forth and none of the previous settings appeared on the display. None of the switches...

Hunter Thermostat RE CO message [ 6 Answers ]

My Hunter Thermostat 44110 show "RE CO" as a flashing message. What does this mean and what do I do about it?

Thermostat message of RE CO [ 1 Answers ]

What does it mean when my Hunter energy star model 44110 thermostat has a message on it :"RE CO" while my air conditioner is running.

Reset filter message on Honeywell Chronotherm thermostat [ 1 Answers ]

How do you reset the filter message on a Honeywell Chronotherm IV Plus Thermostat?

Hunter thermostat--no AC message [ 1 Answers ]

I have read other questions and answers but still getting no where===While I do get this message---I have also checked with my meter and am getting voltage back through --but a tad more than the 24.6==actually getting about 26.1--other than that I see nothing wrong--but still get the dang NO AC...

View more questions Search